Cooling Repair


 

When Should You Repair Your Unit?

When your heating and cooling system is working properly, your home is comfortable and you’re probably not experiencing any significant increase in your monthly utility bills. So when a part malfunctions or your unit stops working, how do you decide if it’s time to repair or replace it? Your local Tempstar® dealer can provide a thorough diagnosis of your system and make a professional recommendation. To help you decide, we’ve put together a list of factors to consider.

Here are some reasons to repair the unit:

  • The cost of repairs is less than one-third the cost of a replacement
  • The unit is less than 10 years old
  • The unit is still under warranty (see your warranty terms)
An air conditioner’s filters, coils, and fins require regular maintenance for the unit to function effectively and efficiently throughout its years of service. Neglecting necessary maintenance ensures a steady decline in air conditioning performance while energy use steadily increases. Check out our Energy Saver 101.

Air Conditioner Filters

The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clogged, dirty filters block normal airflow and reduce a system’s efficiency significantly. With normal airflow obstructed, air that bypasses the filter may carry dirt directly into the evaporator coil and impair the coil’s heat-absorbing capacity. Replacing a dirty, clogged filter with a clean one can lower your air conditioner’s energy consumption by 5% to 15%.

For central air conditioners, filters are generally located somewhere along the return duct’s length. Common filter locations are in walls, ceilings, furnaces, or in the air conditioner itself. Room air conditioners have a filter mounted in the grill that faces into the room.

Some types of filters are reusable; others must be replaced. They are available in a variety of types and efficiencies. Clean or replace your air conditioning system’s filter or filters every month or two during the cooling season. Filters may need more frequent attention if the air conditioner is in constant use, is subjected to dusty conditions, or you have fur-bearing pets in the house.

Air Conditioner Coils

The air conditioner’s evaporator coil and condenser coil collect dirt over their months and years of service. A clean filter prevents the evaporator coil from soiling quickly. In time, however, the evaporator coil will still collect dirt. This dirt reduces airflow and insulates the coil, reducing its ability to absorb heat. To avoid this problem, check your evaporator coil every year and clean it as necessary.

Outdoor condenser coils can also become very dirty if the outdoor environment is dusty or if there is foliage nearby. You can easily see the condenser coil and notice if dirt is collecting on its fins.

You should minimize dirt and debris near the condenser unit. Your dryer vents, falling leaves, and lawn mower are all potential sources of dirt and debris. Cleaning the area around the coil, removing any debris, and trimming foliage back at least 2 feet (0.6 meters) allow for adequate airflow around the condenser.

Coil Fins

The aluminum fins on evaporator and condenser coils are easily bent and can block airflow through the coil. Air conditioning wholesalers sell a tool called a “fin comb” that will comb these fins back into nearly original condition.

Condensate Drains

Occasionally pass a stiff wire through the unit’s drain channels. Clogged drain channels prevent a unit from reducing humidity, and the resulting excess moisture may discolor walls or carpet.

Window Seals for Room Air Conditioners

At the start of each cooling season, inspect the seal between the air conditioner and the window frame to ensure it makes contact with the unit’s metal case. Moisture can damage this seal, allowing cool air to escape from your house.

Preparing For Winter

In the winter, either cover your room air conditioner or remove and store it. Covering the outdoor unit of a central air conditioner will protect the unit from winter weather and debris.

Hiring a Professional

When your air conditioner needs more than regular maintenance, hire a professional service technician. A well-trained technician will find and fix problems in your air conditioning system.

The technician should:

  • Check for correct amount of refrigerant
  • Test for refrigerant leaks using a leak detector
  • Capture any refrigerant that must be evacuated from the system, instead of illegally releasing it to the atmosphere
  • Check for and seal duct leakage in central systems
  • Measure airflow through the evaporator coil
  • Verify the correct electric control sequence and make sure that the heating system and cooling system cannot operate simultaneously
  • Inspect electric terminals, clean and tighten connections, and apply a non-conductive coating if necessary
  • Oil motors and check belts for tightness and wear
  • Check the accuracy of the thermostat.

Cooling Replacement


 

When Should You Replace Your Unit?

Replacing all or part of a heating and cooling system can be a big investment. When an older unit has continuous issues or shows signs of reduced energy efficiency, it could be more economical to upgrade your home comfort system. A Tempstar dealer can help you diagnose your heating and cooling system, as well as help you choose a replacement that fits your needs and budget.

Here are some reasons for replacing your heating or cooling unit:

  • The cost of repairs is near 50% of the cost of a replacement
  • The unit requires frequent repairs.
  • Humidity problems that signal operating issues
  • Warranty expirations
  • High dust and low air quality problems
  • The furnace is more than 15 years old, and the heat pump or AC is more than 10 years old